Locking the Cable & Resetting the Password

1. Locate the dials with numbers (0–9) on the cable. The default combination is 0000, ALL of which align with BOTH of the tabs.

2. Simply pull the cable apart as shown.

3. Rejoin the cable parts, pushing until they click to each other.

4. Turn the dials, disarranging the combination. The cable should be locked in place.

Note: To unlock the cable, dial the default password 0000

Resetting the Password

Dial the default password and pull the cable apart. 

a. Check that the default combination remains in place.
b. Turn the RESET wheel completely clockwise as shown.

Set your new password using the dials.
Note: For best results, take notes in case you forget the password.

Turn the RESET wheel completely counterclockwise to confirm your change.

a. Rejoin the cable parts completely.
b. Disarrange the combination, testing that the cable cannot be pulled apart.